Lowyat.NET: Latest topics by Sam Leong

Gigabyte GTX1050ti OC Edition RM488

Sam Leong — Fri, 18 Mar 2022 18:36:41 +0800

Item(s): Gigabyte GTX1050ti OC Edition

Package includes: 1x used Gigabyte GTX1050ti OC Edition

Price: RM488

Warranty: N/A

Dealing method: Onsite Check

Location: Johor Bahru , Johor , Malaysia

Contact method/details:
Henry Tham
Marketplace URL :
https://www.facebook.com/marketplace/item/357481323054603/

---

Item(s) conditions:
1. Good condition
2. No mining has been done on this card , 100% gaming unit
3. Thermal Paste has been changed 2 month ago

Picture:

Reason for sale:
Wanna upgrade to new graphic cards

Force Tenda AC10U to only use AES algorithm

Sam Leong — Wed, 12 May 2021 09:05:26 +0800

After the update to iOS 14 / iPadOS 14 , if your iOS device connected to WPA/WPA2 using TKIP algorithm , whenever you connect to the network , iOS device will complaining that this network is an unsecured network.

To solve this , i have to set the router to use AES algorithm
But , for my case , Tenda never provide any settings to change encrypt algorithm , at least for AC10U in firmware version V15.03.06.56_en

They just provide encryption mode which using both algorithm , AES and TKIP

Im frustrating in here , so I decided to force this router to use only AES algorithm.

To do this , its easy on Tenda router.

Go ahead to Backup & Restore , click backup
A backup configuration file called RouterCfm.cfg will be downloaded

Make sure to backup the original RouterCfm.cfg before you made any changes
After that , use your favourite editor to edit RouterCfm.cfg
Now , use Ctrl+F to find tkip
You should found theres a

CODE

tkip+aes

Remove the

CODE

tkip+

, just left

CODE

aes

over there
It should look like this

Now , save this file , go ahead to Tenda Router Backup and Restore , click restore and select the file you modified just now
Wait for reboot , connect again to the network , iOS device should not complaining about Unsecured Network already

Hope Tenda can add ONLY AES function in router , it's supported but need some ways like this only can force ONLY AES

Cloudflare WARP able to unblock Netflix

Sam Leong — Tue, 16 Mar 2021 09:29:04 +0800

I notice these few days i saw many post on CN forum stated that CF WARP now can be installed on VPS Linux with wgcf CLI.
(wgcf is third party CLI which can simulate the normal Cloudflare WARP registration and generate wireguard configuration files auto)

Then i wanted to try on my EUServ IPV6 only VPS since CF WARP is also providing IPV6 and IPV4 so that means i can get a CF WARP IP on IPV4 interfaces.
Guess what , it work.
Netflix Region depends on your connected CF WARP region
This script can detect is your network IP support Netflix. (but its CN so i put translate here)
1. 解锁非自制剧 - 代表可以看NF买下的第三方版权影片 (Unblock non-self-produced dramas - Can watch all movie that Netflix buy it)
If your VPS show the result like the screenshot below :

meaning your IPV4 interface support to watch every Netflix movie thats allow to watch in your region (Which means fully unblocked)
2. 解锁自制剧 - 代表可以看由NF自己拍摄的影片 (Unblock self-produced dramas - Can watch all movie that Netflix selfmade movie [Usually the movie will show a N logo at the left side like the picture show below])
The N logo

If your VPS show the result like the screenshot below :

Meaning your IPV6 interface support to watch every Netflix selfmade movie thats allow to watch in your region (Only can watch the N logo movie)

Through this way i already get unblock my 3 VPS in SG , DE , JP to get watch Netflix
No need to pay expensive price to use VPN ady

Btw Cloudflare WARP also suitable for who need to get a IPV4 / IPV6 address for free if your VPS only have IPV4 or IPV6

Step : https://p3terx.com/archives/use-cloudflare-...s-for-free.html

Looking for unifi ownership transfer

Sam Leong — Mon, 01 Mar 2021 18:54:27 +0800

Line has been terminated!

TM Blocking Speedtest.net?

Sam Leong — Thu, 25 Feb 2021 15:22:19 +0800

Is TM blocking speedtest.net?
I get Timed Out error

but with VPN its works
and also tested on my VPS in SG speedtest.net is working.

CODE

wget https://speedtest.net
--2021-02-25 07:21:49-- https://speedtest.net/
Resolving speedtest.net (speedtest.net)... 151.101.130.219, 151.101.66.219, 151. 101.2.219, ...
Connecting to speedtest.net (speedtest.net)|151.101.130.219|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://www.speedtest.net/ [following]
--2021-02-25 07:21:49-- https://www.speedtest.net/
Resolving www.speedtest.net (www.speedtest.net)... 151.101.2.219, 151.101.66.219 , 151.101.130.219, ...
Connecting to www.speedtest.net (www.speedtest.net)|151.101.2.219|:443... connec ted.
HTTP request sent, awaiting response... 200 OK
Length: 110839 (108K) [text/html]
Saving to: ‘index.html’

index.html 100%[=====================================================================================>] 108.24K --.-KB/s in 0.002s

2021-02-25 07:21:52 (48.8 MB/s) - ‘index.html’ saved [110839/110839]

Huge Spike on Tata Communication SG with TM

Sam Leong — Sun, 14 Feb 2021 18:23:02 +0800

ISP : Unifi
Plan : 50Mbps
Fibre / VDSL2 : VDSL2

Im currently experiencing huge spike of ping when i visit my Oracle Osaka Server.
Normally TM with Tata Communcation only get around 100~-110~ms
But today i get 120~-140~ms and the speed is terrible (Not even reached 10Mbps)

And after trace route , seems to be Singapore Tata Communication Problem

Theres no way to get a latency of 200ms+ from Malaysia to Singapore right?
Any solution? TM traffic blow up again? or Tata Communication traffic blow up?

LiteSpeed Official Website Unable Visit @ TMAS4788

Sam Leong — Tue, 02 Feb 2021 13:57:51 +0800

Anyone notice that TM Network unable to visit LiteSpeed Official Website?
straight away connection reset
LiteSpeed Official Website
TM firewall doing something? or MCMC?

when i use my GCP as relay it works smoothly

Anyone experience the same problem with TM network or other ISP?

PHub IP unblocked from Telekom Malaysia

Sam Leong — Mon, 07 Dec 2020 15:13:54 +0800

Seems like PHub IP = 66.254.114.41 is getting unblocked from Telekom Malaysia
Using CloudFlare DNS + No VPN , im able to ping it through ICMP and TCP
DIG Result:
pornhub.com. 2835 IN A 66.254.114.41
ICMP Ping Result :
Pinging 66.254.114.41 with 32 bytes of data:
Reply from 66.254.114.41: bytes=32 time=169ms TTL=57
Reply from 66.254.114.41: bytes=32 time=169ms TTL=57
Reply from 66.254.114.41: bytes=32 time=220ms TTL=57
Reply from 66.254.114.41: bytes=32 time=171ms TTL=57
TCP 443 Result :
Probing 66.254.114.41:443/tcp - Port is open - time=170.681ms
Probing 66.254.114.41:443/tcp - Port is open - time=183.535ms
Probing 66.254.114.41:443/tcp - Port is open - time=198.246ms
Probing 66.254.114.41:443/tcp - Port is open - time=169.085ms

Ping statistics for 66.254.114.41:443
4 probes sent.
4 successful, 0 failed. (0.00% fail)
Approximate trip times in milli-seconds:
Minimum = 169.085ms, Maximum = 198.246ms, Average = 180.387ms

Its getting block on March on TM network but seems now they unblocked it.

But last time i remember PHub will be routed to US pop. But now seems they going to France. Maybe thats why its kena unblocked?

VDSL2 High Rise wanted to upgrade to FTTH

Sam Leong — Fri, 13 Nov 2020 14:40:46 +0800

Recently due to CMCO again dilaksanakan KL , im staying house again. My house is under High Rise with VDSL2 , using TM UniFi plan 50MBPS(Last time 30 they turbo me to 50) , but its not enough for me due to not only me staying house , my parents staying house and using Google Meet to continue their work. So for this , i requested the upgrade to upgrade my house plan to 100MBPS (129) , im using TM 50mbps right now and paying 137 per month , if i upgrade to 100MBPS i can get more cheaper price with higher speed， isn't it. But then due to TM deny to fiberize my building , im stucked 50mbps. So i created a complain to MCMC at 25/09/2020

Ok so i think i can get a reply within one week. Guess what. They reply to me only at November 3 , 2020

And reply tell me like this

Basically just tell me have to wait and wait , i keep complain to get fibre since 2018 i sign unifi 30mbps. After 2 years still no fibre.

Then i reopen case again at the same day they reply to me , and i mentioned i wont close the case if u guys dont pull TM fibre to my building. Guess what , they told me pending building management approval at 9 November 2020.

So when they mention pending building management approval , im kinda weird , then i go building management ask , they told me they didn't in charge for this and they don't know TM got ask them for approval to install fibre. Then they told me refer back to TM????

No ETA. No more futher details. Thats all. I will definitely and guarantee to upgrade my unifi plan if they come and fiberize my building. I willing to pay money but they don't want to accept the money

Any solution? Reopen the case since the last reply of pending building management approval [9/11/2020] and no till today yet no reply.

IPV6 For AP Mode on ZTE H267A?

Sam Leong — Thu, 21 May 2020 15:18:54 +0800

Hi , I wanted to ask that is there any option to let my AP get connected to ZTE H267A IPV6 and enable IPV6 Connectivity? Tested ZTE H267A IPV6 worked but after connected AP network its not work at all , and my whole house devices are connected to AP Network as ZTE WiFi Coverage sucks. Im using DLink DIR-865L for AP. Any way to connect it to IPV6? I tried many method and its still failed.
Tried on Auto detection still fail

ZTE is on Router (HSBB) mode.

ZTE H267A TM UNIFI CSL LOGIN

Sam Leong — Sat, 28 Dec 2019 12:32:01 +0800

I get telnet to my router ZTE H267A given by TM and running VDSL2 on 50mbps plan (last time 30mbps but auto upgrade 50mbps) (2.4GHz seems to be cap at 30mbps and wont go up)
I successfully got logged in into the CLI of ZTE H267A which running on Software Version V1.0.0_MYT3A and Boot Version V1.0.2.
[attachmentid=10384119]
The CLI default username is admin and password is public which is work for me and i get successfully login.
[attachmentid=10384120]
The ZTE H267A Log also shows that CLI Login Successful.
[attachmentid=10384121]
I found out although i successfully log in to the CLI but it shows up require a password to enable privileged commands or else you can only use the ping command or exit telnet.
[attachmentid=10384122]
I tried the default password zte and i get successfully log in to the CLI Privileged Commands
[attachmentid=10384123]
I saw many command that didn't show up when im not login to the CLI Privileged Commands including shell
I tried to get into shell but it require password and username again. The default username is admin and password is admin. I tried and also get successfully login.
[attachmentid=10384124]

Conclusion :
CLI Login Username : admin
CLI Login Password : public

Privileged Commands Password : zte

Shell Username : admin
Shell Password : admin

I literally don't know what can do with this shell. I hope there is any people can use this tutorial and install DDWRT or any other Router OS to the ZTE H267A and let the router able to meet the maximum performance and features of this router.

Who are getting Digi 4G+ on Xiaomi Devices?

Sam Leong — Wed, 16 Jan 2019 20:34:58 +0800

Who are getting Digi 4G+ on Xiaomi Devices?

I am now using Redmi Note 5 on China Rom, able to support Digi VoLTE but VoWiFi not supported and Digi 4G+ i didn't ever seen .

As i know Redmi Note 5 at KLCC + unifi sim card are able to show out 4G+ (PIC1) , but Digi just show 4G no + (no CA) , Snapdragon 636 should support CA for Digi (intra or inter)

I am seeing some users seem to get 4G+ on some Xiaomi Devices

I am hope Digi can let the suitable Xiaomi Devices to use Digi 4G+ network

Who are getting turbo upgrade in High Rise VDSL2?

Sam Leong — Fri, 21 Dec 2018 14:03:24 +0800

Who are getting turbo upgrade in High Rise using unifi with VDSL2?

I apply unifi at August and i went to TMPoint , they say will upgrade at January 2019.
but my apartment is using copper line which is VDSL2. Max reach 30mbps only. Call TM for install fiber,tell me find management. Find management(my house is JMB) tell me find TM. WTF?
My house had been lightning struck one time with using the copper line.
Just next 100 m the apartment have FTTH (Fiber To The House), which my apartment using copper (Fiber to MDP and copper to house).
Im using unifi bonanza campaign rm139 with hypptv and 30mbps broadband plan.
My house VDSL2 can only max reach dl 40mbps
ul 10mbps
[attachmentid=10142663]

So Sigh. Already reported MCMC.