Lowyat.NET: Latest topics by Cryptosporidium

Camera problem: White dots and horizontal lines

Cryptosporidium — Sat, 09 Aug 2008 16:50:12 +0800

My friend and I bought each a Touch Dual a yesterday. I have problem with the back camera. When I launch the camera, I found 4 white dots on the screen. So I took photo on black background. True enough, there were 4 dots. I transfered to my PC to view (just in case it was the Dual's KCD), and the image is as per attached. However, with the front camera, everything seem fine.

Then I asked my friend if she has the same thing. She got it worse as hers has vertical white lines.

Anyone with this problem?

Pocket PC w/o built-in WiFi

Cryptosporidium — Thu, 25 Oct 2007 22:11:33 +0800

How can I configure the WiFi card so that it works? I don't have WLAN utility installed in my Windows Mobile 5 PPC.

Huawei SmartAX MT800A + Belkin Wireless G Router

Cryptosporidium — Mon, 30 Jul 2007 09:33:48 +0800

Personal equipment
Modem: Huawei SmartAX MT800A
Router: Belkin Wireless G Router
Firewall used:

Hi! I was trying to upgrade my current wired to wireless, but to no avail.

Prior to this wireless router, I was using PPoE mode on the modem+switch.
TCPIP properties: IP address: 192.168.1.2, Subnet: 255.255.255.0, Default gateway: 192.168.1.1, DNS: 202:188:0:1 and 202:188:1:5.

So, I just used the installation wizard CD. But the internet connection checking stage failed. Then I tried setting the modem to bridge mode, and use the wizard again. But also failed.

The IP address of the wireless router is 192.168.2.1.

Physical setup: Internet > Modem > Wireless router > 2 wired desktop PC + notebooks

Would appreciate you help in making this work. Thank you

anyone using Streamyx's Huawei Smart MT800A?

Cryptosporidium — Mon, 10 Jul 2006 22:39:02 +0800

Broadband provider
ISP/package: Streamyx RM66
Location: Selayang
Have you called your ISP's helpline?: Yes, but they asked me to call their installer vendor

Personal equipment
Modem: Huawei SmartAX MT800A
Switch: DLink
Firewall used: ZoneAlarm

i would like to make a connection to internet --> modem --> switch --> 2 computers

i read in this forum that i am supposed to set the modem to router mode. i will go step by step. please check for me is i am doing the right thing?

first, i entered the web management window

click on ATM setting
> VPI/VCI: 0/35
> operation mode: enable
> encapsulation: LLC
> connection type: PPP
> PPPoA/PPPoE: PPPoE
> IP Unnumber: Disable
> Service name: [blank]
> Default route: enable
> Traffic index: 0
> Username: xxx@streamyx
> Password: xxx
> Use DNS: enable
> Configured MTU: 1500

then, i went to Other setting > ADSL mode
> i left it to multimode

then, at Other setting > LAN config
> LAN IP: 192.168.1.1
> LAN network mask: 255.255.255.0

at Other setting > DHCP mode
> select DHCP server

at Other setting > DNS
> DNS relay: enable
> Primary DNS server: 202.188.0.133
> Secondary DNS server: 202.188.1.5

at Other setting > NAT > enable
> click add
> Rule type: redirect
> Protocol: TCP
> Local IP: 192.168.1.2 (my PC's IP address)
> Global address from: 0.0.0.0
> Global address to: 0.0.0.0
> Destination port from: any other port, 0
> Destination port to: ano other port, 65535

at Advanced function > IP filter
> Security level: Low
> Public default action: accept
> Private default action: accept

Then i save and close the IE window.

from the above steps that i've taken, do you think it's alright? i tried with the configuration numerous times, but i am back at bridge mode, as i cant update my antivirus, but i can surf the net. hope u big bros can help me out.