Lowyat.NET: Latest topics by Calcool77

[SOLD] Nilam Puri Condominium at Bukit Puchong

Calcool77 — Sun, 06 Dec 2020 16:50:24 +0800

Nilam Puri Condominium at Bandar Bukit Puchong FOR SALE
Property Details:
★ 1033 Sqft ★
★ Freehold (Strata Title) ★
★ 3 bedrooms, 2 bathrooms ★
★ Kitchen Extended and Renovated with kithen cabinets ★
★ Renovated with Plaster Ceiling ★
★ Major Furnishing (4xAirconds, 2xShower Heater, Rinnai Hod and Hood, Fridge & Front Loading Wasching Machine (optional)) ★
★ 2 Bathrooms completed with Epoxy Coating ★
★ 3 Bedrooms completed with Vinyl Flooring ★
★ Master Room comes with build-in Wardrobe ★

★ Strategic Location, 3 mins away to LDP, 5 mins to Tesco Bukit Puchong, surrounded by amenities like Post Office, Taylor International School, Primary and Secondary School ★
★ What you see is what you get ★

★ Kindly please contact owner @ zero one two five seven seven eight seven one six ★

【WTS】 Hotlink Share a Top-Up

Calcool77 — Sat, 21 Sep 2019 11:16:59 +0800

Item(s): Hotlink Share a Top-Up

Package includes:★Please take note!!This is Credit Share, Not Top Up service!!★
★Validity Period only 5 day★
★First Come First Serve★

★★RM30 selling for RM25★★
★★RM60 selling for RM50★★
★★RM100 selling for RM80★★
★★RM200 selling for RM160★★

★Please contact 0125778716 for Bank Account★

Reason for sale: Excess Credit on my Hotlink number

[WTS] USED Hot Inazma Hyper Gold

Calcool77 — Sat, 03 Mar 2018 14:51:25 +0800

Item(s): Hot Inazma Hyper Gold Official Webpage

Package includes: Hot Inazma Hyper Gold with upgrade kit (3 Ground Cables)

Price: RM350

Dealing method: COD or Postage

Contact method/details: WhatsApp 0123162316 for quick respond
---

Item(s) conditions: Good Condition, previously installed in Mazda CX-5

Picture: As attach

Reason for sale: Upgraded

[WTR] Subang Andaman Condominium

Calcool77 — Tue, 12 Aug 2014 14:18:10 +0800

Subang Andaman Condo For Rent

Property Details:
• 1149 sf, 3 rooms 2 bathrooms
• Partly Furnished with build in kitchen cabinet
• Facing Swimming Pool
• 2 parking bay
• Looking for RM 1,600 Rental (Negotiable)
• Subang Andaman

Kindly contact Mr. Ng (WhatsApp/SMS/Call 012-9188210) for more info and viewing appointment.

Q8400 match with Asus P5B Premium

Calcool77 — Thu, 27 Aug 2009 16:01:47 +0800

Hi there,

Am would like to build a rig for myself this weekend. Basically I only do mild OC and I refer some review that Asus P5B Premium basically can support up to 1333Mhz although do not officially declared.

Just wondering, whether below is a good match?? I would like to save on Mobo as I only do mild OC..

Q8400 + Asus P5B Premium

Or you may suggest a better combination.

Pls adivse..thank you sifu

Mysterious Figure Seen In KL?

Calcool77 — Mon, 13 Jul 2009 13:39:45 +0800

Hi Guys...

If you read today The Star, there is a report of Mysterious Figure Seen in KL at the bottom of the main page..

What the H**K is tat??

I cant find the link for this source..those who found it pls pm me, I will add on later on

Hatten Square in Malacca

Calcool77 — Mon, 06 Jul 2009 12:09:07 +0800

Hi All,

I managed to visit Malacca last weekend and I noticed there is a new building in the Malacca town center.
The new building called Hatten Square and it is located just beside Malacca Parade(MP) and Dataran Pahlawan.
To be more precise, it is opposite Carrefour and they are link together as well as what I can noticed.

Just would like to ask, is anyone heard or know about this? Pls share your opinion or pricing level here
I suppose it is a condominium, Thanks in advance...

Motherboard Bios Corrupted (Gigabyte P965-S3)

Calcool77 — Tue, 12 May 2009 08:54:06 +0800

Dear all sifu out there,

I am using Motherboard of GA P965-S3. My pc cannot boot into post screen after I installed a program which will tweak the Bios settings. I have tried to erase or clear the CMOS but still it cannot boot into post screen. I suppose my bios had corrupted.
Pls help me if anyone experience this kind of problem before. Also pls let me know if there is any service center in Malaysia.
Thanks in advanced

Se7en Transformation Pack

Calcool77 — Sun, 10 May 2009 20:24:30 +0800

Hi all, noticed that Se7en transformation pack had released by windownsxlive, wondered had anyone installed and tested?
If yes, kindly pls share your opinion although official window Se7en is yet to launch.

By the way, you can download Se7en Transformation Pack at => HERE <=

FD Investment or Unit Trust Invesment?

Calcool77 — Wed, 17 Sep 2008 18:27:16 +0800

Hi to everyone,

I was invested in CIMB Principal unit trust since 3 years back. However, my investment in CIMB Principal was nearly drop beyond my capital. Luckily I discovered on time and sell it off. Thus, I was not making any money since 3 years back.

With the current market, it is hard to judge which bond or share will grow in the future. To clarify my situation, I do not have capital like 10k or 20k for investment now. However, I am still capable to invest around 5-8k.

Since I do not have much time to monitor the market, I would like some suggestion whether to invest in FD or Unit Trust again? To play safe, my initial plan is to invest in FD though interest is low but secure.

However, which bank owns the best rate and service for time being? Kindly pls give ur most precious suggestion or comments here? Others might take this thread as a reference as well. I don mind listen to any comments or suggestion.

Thanks in advanced

VHDL PRO NEEDED

Calcool77 — Sat, 25 Aug 2007 12:06:46 +0800

To all vhdl pro outthere..pls take a look at the questions below..does anyone can help me solve that??there are templates provided and u have to use the templates provided

QUOTE

Problems:
1. Write a model for a D flip-flop (using std_logic), with tCQ1 and tCQ0 timing parameters for its output changing to '1' and '0' respectively. The default values for these parameters are 3 NS and 5 NS and are passed to the flip-flop model via its generic parameters. This flip-flop has an asynchronous clear input, CLR, which sets its value to zero, and an asynchronous SET input which sets its value to one.
2. Write a model for a circuit which can be configured as either type of an LFSR described above, using the flip-flop in Problem 1.
3. Write a configuration specification for your reconfigurable LFSR.
FF Delay = 4 NS, 6 NS
4. Write a testbench that instantiates your circuit and sets the initial value of the LFSR (its seed) to (1110101000001111) and configure it as an LFSR Mode 1 with the following polynomial, using Problem 3 specifications.
H = (110000000000010)
5. Write a testbench that instantiates your circuit and sets the initial value of the LFSR (its Seed) to (101011110011) and configure it as an LFSR Mode 2 with the following polynomial, using the Problem 3 specifications.
H = (11000110010)

Use templates shown below.
-- Problem Set 3
-----------------------------------------------------------
LIBRARY IEEE;
USE IEEE.std_logic_1164.ALL;
--
ENTITY XOR2 IS
PORT(i1, i2: IN std_logic; o : OUT std_logic);
END XOR2;
--
ARCHITECTURE structural OF XOR2 IS
BEGIN
--
END structural;
LIBRARY IEEE;
USE IEEE.std_logic_1164.ALL;
--
ENTITY DFF IS
GENERIC (tcq1: time :=3 ns; tcq0: time :=5 ns);
PORT (D, Clr, Set, Clk : IN std_logic; Q : OUT std_logic);
END DFF;
--
ARCHITECTURE beh OF DFF IS
BEGIN
--
END beh;
LIBRARY IEEE;
USE IEEE.std_logic_1164.ALL;
--
ENTITY LFSR IS
GENERIC (H : std_logic_vector; MODE : integer; N : integer);
PORT(Clk : IN std_logic; Clr : IN std_logic_vector;
Set : IN std_logic_vector;
Dout: OUT std_logic_vector; Sout: OUT std_logic );
END LFSR;
--
ARCHITECTURE structural OF LFSR IS
BEGIN
--
END structural;
-- H = (110000000000010); Mode =1; FF Delay = 4 ns, 6 ns;
CONFIGURATION Config_of_LFSR OF LFSR IS
--
END FOR;
-----------------------------------------------------------

[addedon]August 27, 2007, 1:17 pm[/addedon]Anyone can help??pls take a look 1st...

Why My COM Cant Boot into post screen?

Calcool77 — Fri, 06 Apr 2007 21:08:47 +0800

Hi to all pro out there..recently im using the rig as follow and my mobo bios now is f8 which is the latest for S3 edition,i jus bought myself a 19" Viewsonic 1912WB model and format to Vista Business.

Here come the problem,whenever i left my com idle for sometimes,it will automatically enter sleep mode which my com entirely shut down. And i jus need to touch the mouse to activated my com again,but the problem is whenver i try to activate my com,then my com will like hangging,pc still running but lcd showing no input,and i try restart,it cant even enter post screen!!!

Is there any of my hardware doesn't meet vista regonization??it shudn't be my ram cos i try to plug my fren's ram and the same prob happen again!!pls help

THX in advanced

PC hang when idle or sometimes switch on

Calcool77 — Mon, 26 Mar 2007 20:36:09 +0800

Hi to all pro outhere...currently im using the spec according to my sig and i jus add another 2X512MB of Mushkin into my spec,so now my rig have 2G ram but i found it sometimes i cant switch on my com and cant even boot into post screen,it will beep continuosnly and according to my manual troubleshotting,it is becos of DRAM but case may be varying...so im wondering wut happen to my com??i had increase 0.1V for the DRAM voltage but still i get the problem!!!Help pls~~

Izzit the chipset not compactible??or may be other hardware problem?or shud i futher increase the dram voltage??

[WTA]Latest price for 19" onwards LCD pricelist

Calcool77 — Fri, 23 Feb 2007 21:18:01 +0800

Hi to all outhere...planning to get myself a LCD soon,of course the larger the better it is but im concerning about the pricelist...will it futher decrease??

Izzit now is the perfect time to get a 22" LCD??my priority is 22"..thx in advanced for viewing and helping me

p/s:Any brand will do btw

My Atrix Side Panel MOD

Calcool77 — Sun, 14 Jan 2007 23:32:09 +0800

Well...currently having my sem break now,so decide to mod my Atrix side panel rather than spent all my time either in front of a monitor or tv

Well...my initial idea is to exchange both side panel to the another side which means left panel to the right side as well as the right to the left..

Initially..Atrix left panel comes as shown in the pic which im going to use it as my right panel....
[attachmentid=180890]

And im going to mod my right panel which im going to cut it and replace with an arylic and place it on my left panel
[attachmentid=180894]
After marking...its time to chop chop chop
[attachmentid=180895]
Well..it seems easy to see wut all the modders done here,but when it comes to me...all i can say is simple yet complicated
[attachmentid=180899][attachmentid=180901]
Drill some holes and sand it before spray to matt black again....
[attachmentid=180905][attachmentid=180906][attachmentid=180909]

Well..jus as i tot all is going smoothly then i encounter some prob...my left panel cant fit to my right side of my casing...notice the metal tat i circle up...it block the left panel to fit to my fight hand side...
[attachmentid=180912][attachmentid=180927]

Nth much i can do now...i have to chop the filter of my left panel...hopefully everything can be fit after this
[attachmentid=180928]

[WTA]Digital Watch VHDL

Calcool77 — Wed, 20 Dec 2006 00:08:09 +0800

Hi to all expert out there...currently im having an assignment, topic is digital watch vhdl code...if u guys do kno how to program it or any source bout it..jus let me kno...

thx in advanced