Lowyat.NET: Latest topics by VictorKeong

Carbon ZeroX

VictorKeong — Wed, 22 Jul 2020 00:34:04 +0800

Hey all,
Was just randomly scrolling facebook and I came across an additive called Carbon Zero X.
I know there are alot of other additives out there in the market as well, but I never really understood the science behind them and whether it is a real legit thing to buy, and will it benefit the engine?
What is more intriguing for me is, this particular brand (CZX) claims that it is applicable for not only engine, but Brake,compresors, power steering and even gearbox..
I do not use any additives in my engine oil, what more in other parts of the car. So I am here today to be exposed and to be educated, i am fresh and newbie to this World of “additives” Technology.

What are your thoughts about this? Have you heard of this brand? What is the science behind it? Any consumer reviews?

This thread is serve as a discussion, not brand bashing or anything. Just knowledge sharing. Cheers

Fine Tuning Adjustable Coilovers

VictorKeong — Sun, 31 Mar 2019 22:58:44 +0800

Hi All,
Need some advice regarding fine tuning set of adjustable coilovers. Car is Perodua Axia 2014 manual SE spec
I newly installed a set of adjustables couple of months back. before this i drive on sport springs with Stock Shocks.
Tested friend's car, (Alza with Gab SS)drove the car for a week, love the adjustable set up, also test drive few other cars like kancil etc. to get the feel before making my purchase.

Before that let me share out spec of my car

Rims are 15 inch 7 jj Lenso Project D
Tire spec 195/50/R15
Front tire PS3 - 30psi
Rear tire Ecopia EP200 - 28psi
Adjustables are from Ftuned, (Hi-Lo, Soft-hard, bodyshift) damping adjust-ability, front 32 clicks, rear 24 clicks.
rear are coilovers as well, running 4K springs front and rear, (Ftune recommended settings for Road - Comfort set up)
Front and rear springs are preset to 5mm from handtight. measured up same left and right.
Using top hats mount from Alza for front, rear standard axia bushings.
Ride height, front 2 fingers from fender, rear 3 fingers from fender.
Currently setting is on 9 clicks front and 7 clicks rear (from soft).
Bushings, mounts, tie rods, control arms all changed during installation of coilovers

Other mods
"Unsprung weight category"
- Front running two pot calliper, front disc 11.2" from toyota caldina
- Rear running 11" Disc brake with calliper from Toyota Wish

Okay,
I love my coilovers, how it handles and all,
My car, personally i feel it do not ride that stiff, and going over potholes or bumps are perfect for me.
But i have these annoying feel, which i do not feel much on other adjustable cars when i sit or drive in.
On a flat road, my car seems to be bouncing a little bit at a fast rate, i did try decreasing and increasing the clicks. Almost like no change in "oscillating" feel. Happens at slow speeds, 30-70 and reduces abit when I drive faster (110-130) increasing the clicks only noticeable over bumpy roads and cornering. Reducing the clicks feels it bounces alot more.
My tires are fine, still quite good, no bumps/bruises/bloating. tested pumping air/reduce air. from 26-35psi. I feel above 32 my tires start to lose grip, maybe car is too light. 28-30 personally feel that the tires will have maximum traction patch contact and even thread wear.
Checked the torque on screws and bolts for the suspensions, making sure no loose parts.
Seats, i tried sitting passenger front and rear, same bounce.

Be really honest,
I am not too sure if this high rate bounce or oscillation feel is caused by the set up is too stiff or too soft, too less damping or overdamping
What else should i check?

I am currently at Butterworth. Won't be going down to KL anytime soon to get my car checked and tuned at Ftune HQ. thought of trying to DIY first.
Parts were installed at a local distributor.

Thanks

1 Set ICE for sale

VictorKeong — Wed, 06 Apr 2016 00:17:53 +0800

Item(s):
1)1 pair of 6" Component Speakers Mercury C62

» Click to show Spoiler - click again to hide... «

2)1 piece of 4-Channel Mercury MGR495

» Click to show Spoiler - click again to hide... «

3)1 Piece HU Pioneer AVH-X1750DVD

» Click to show Spoiler - click again to hide... «

4)1 piece of 8" Underseat Active Subwoofer by Epsilon
5) All RCA cables

Package
includes:1HU, 1 Set Component Speakers, 1 Amp, 1 active underseat sub, 1 pair of Tweeter mount for MYVI, all rca cables

Price:
RM2000 for whole set. Nego. Serious buyer
Not selling piece by piece

Warranty:
2weeks warranty by seller after installation,
total refund if item not working,
(Return items first, only refund, COD method)

Dealing method:
COD, Fix appointment meet for testing and listening. If satisfied only buy

Location of seller:
Johor Bahru, Gelang Patah, Skudai

Contact method/details:
Name: Lennon Wong
Email: lennonwong412@gmail.com
Phone : +6010-827-8117 (Call or Whatsapp)

Age of item:
a year old. purchased at May 2015

Item(s) conditions:
9.8/10

Picture:

» Click to show Spoiler - click again to hide... «

Reason for sale:
Changing ownership of the vehicle

Any inquiries please call the number stated. Thanks

Finding Good Components for 5"

VictorKeong — Fri, 01 Apr 2016 01:18:17 +0800

Hi guys. Super newbie here when comes to ICE
was planning to upgrade my speakers on my Perodua Axia. Stock size is 5" (13cm)
any suggestions? looking for component.
2 way /3way... (dont think have for 5")
budget for the speakers 1 pair.. around 500

Thanks

p/s is there any thing like an adapter or something to fit in bigger speakers? from small to big.

Interested in this.
http://xciteaudio.com/RIP_165S3?filter_name=component

But yah.. 6.5" haha

Lumia 735 upgrading to WP10

VictorKeong — Tue, 22 Mar 2016 00:13:11 +0800

Hi guys.
Recently i tried upgrading from 8.1 to 10 using upgrade advisor.
It said my internal memory not enough space. Needs additional 900mb.
So i hard reset my phone.
Set everything back to u.s, from region to language.
Installed all updates for 8.1.
Then tried upgrading to 10 using advisor again. But this time round it gives the message "working with your carrier service to deliver" yada2.
Tried using windows insider also. Even worse, said i got connection issues, try set my clock right etc2.

Any other ideas how to upgrade to WP10? Thanks

DRL LED DAYLIGHT + TURN SIGNAL

VictorKeong — Sat, 11 Jul 2015 18:31:44 +0800

http://www.mudah.my/Universal+drl+led+dayl...al-33021999.htm

where do i get this item around Penang or Mainland side?
preferable if the guy can help fix for me. im noob when come wiring
Want to fix on to my perodua axia.
Thanks

[YOUTUBE]https://youtu.be/L4OQSvqpBoI[/YOUTUBE]

i also wanted to fit this eagle eye ring and also this orange led lining but many people advice not to cause it doesnt last long.
so any ideas how i can make somewhat like this but last longer?

thanksss

Lumia 730(dual sim)-735(LTE) Official Thread V1

VictorKeong — Wed, 17 Sep 2014 23:33:28 +0800

NOKIA 730 (DUAL SIM) and NOKIA 735 (LTE)
To be released soon.~

SPECIFICATIONS FOR NOKIA LUMIA 730 (Phone arena)

SPECIFICATIONS FOR NOKIA LUMIA 730 (GSM)

SPECIFICATIONS FOR NOKIA LUMIA 735 (Phone Arena)

SPECIFICATION FOR NOKIA LUMIA 735 (GSM)

NOKIA LUMIA 730 vs NOKIA LUMIA 735

LUMIA 730 and 735 Hand On

[YOUTUBE]http://youtu.be/MG1eRcTNtFs[/YOUTUBE]

[YOUTUBE]http://youtu.be/J7VcL-2TJKo[/YOUTUBE]

[YOUTUBE]http://youtu.be/rmkNiLRFZKI[/YOUTUBE]

REVIEW ON LUMIA 730 AND 735

Lenovo K900 Official Thread V1

VictorKeong — Sat, 10 Aug 2013 22:35:07 +0800

LENOVO K900 OFFICIAL THREAD
Powered by Dual-core Intel Atom Clover Trail
Big in size, Bigger in Power

Lenovo K900 Thread Version Beta

SPECIFICATION(CLICK HERE)

ADS

[YOUTUBE]HRbIp1Pp6aI[/YOUTUBE]

UNBOXING

[YOUTUBE]24s2-bcHwIQ[/YOUTUBE]

BENCHMARK TEST

[YOUTUBE]8h7vvgXopX4[/YOUTUBE]

Testing by Andrewtst

[YOUTUBE]NsSpO8meTQA[/YOUTUBE]

GAMING REVIEW

[YOUTUBE]VZ6Lg9nvTz4[/YOUTUBE]

LENOVO K900 REVIEW (CLICK HERE)

Need some advice

VictorKeong — Mon, 29 Oct 2012 17:00:13 +0800

im planning to upgrade my PC, since my old mobo and cpu is literally dying. just waiting for the time for the computer cant on haha

i got a GT640 graphic card,
which processor, mobo, ram is best for this graphic card?

goanna use back the old graphic card, harddisk, and casing

budget around 1.5k -> 2k

what i do on my com
-> video editing, AF and Vegas
-> designing, (solid work, autocad, 3Dsmax)
-> gaming

thanks

Mechatronics Engineering

VictorKeong — Tue, 10 Apr 2012 22:27:00 +0800

Well im SPM grad (2011) and is interested in taking up Mechatronics Engineering
few places i have in mind, but am confused bout where to go, or where is best to go

- UCTI(KL)

- UNIMAP(perlis)

- GMI(selangor)

- FRIS(Penang)

- KDU(penang/KL)

may i have some reviews/comments or anything that may help me out from u guys ?? please and thank you

the reasons im confused

- certain universities they put it as Electrical and Electronic Engineering (Mechatronic) and their subjects are mostly towards electrical side
- some straight B. Eng Hons in Mechatronic Engineering and focuses mainly in electronic, programming and mechanical principles

my results

4A 4B+ 1C+

English - A
Sejarah - A
Mathematics - A
ICT - A

Add. Maths - B+
Physics - B+
Bahasa Melayu - B+
Moral - B+

Chemistry - C+

Sony Ericsson Xperia™ Pro and Neo Official Thread

VictorKeong — Wed, 11 Jan 2012 13:25:08 +0800

REMINDER :
1. NO discussions on warez, pirated apps
2. Do NOT ask for links to such apps or links to get free apps which needs to be paid for
3. Do NOT post links or references to such sites that promotes downloads of pirated, cracked, warez apps
4. Please keep the thread CLEAN from such illegal stuffs
5. Any members demands / pirated apps (or of similar nature) will be outright ignored and will attract warning and suspensions from the mods.
6. Posts / assistance given in this thread are on a voluntary basis by the members and please respect that.
7. Readers are advised to try out any suggestions at their own risk.
8. Learn to use "Search Topic" at bottom of each page before asking
9. Please use the language that most people can understand (English, Mandarin, Hokkien, Bahasa Melayu)
10. Do CHECK OUT this thread TQ
http://forum.lowyat.net/index.php?act=ST&f...0#entry48147584

XPERIA™ PRO

Sony Ericcson

Specs

[YOUTUBE]qWct-ycxBKw[/YOUTUBE]

XPERIA™ NEO

Sony Ericsson

Specs

[YOUTUBE]IJU1pe5czvU&list=PL9F0C2E8F18024F1F&index=1&feature=plpp_video[/YOUTUBE]

XPERIA™ NEO V

Sony ericsson Page

Specs

[YOUTUBE]sGVCaa4hzaU[/YOUTUBE]

ENJOY

Xperia Pro Owner's List

» Click to show Spoiler - click again to hide... «

Xperia Neo Owner's List

» Click to show Spoiler - click again to hide... «

Xperia Neo V Owner's List

» Click to show Spoiler - click again to hide... «

XPERIA PRO ROOTING TIPS - CREDITS TO SiuYi

» Click to show Spoiler - click again to hide... «

Updating ur Rooted Device - Siu Yi

» Click to show Spoiler - click again to hide... «

GUIDE TO SOLVE BOOTLOOP / BRICKED UNITS
- Only for those units that haven't been unlocked bootloaders

» Click to show Spoiler - click again to hide... «

Phone Covers/Protectors General Comparison by SiuYi

» Click to show Spoiler - click again to hide... «

COMPLETE LIST OF ROMS
http://forum.xda-developers.com/showthread.php?t=1642480

CWM FOR ICS, WORKS WITH LOCK BOOTLOADER -TUTORIAL-
credits to SnoeII

http://forum.xda-developers.com/showthread.php?t=1426912

Having Problems

VictorKeong — Sat, 17 Dec 2011 13:49:17 +0800

I have several issues with my com which is running on Windows 7 32bit

my com makes a weird annoying beeping sound every 10secs
my com freezes / hang after windows finish booting
my com oftenly gets the blue screen / memory dumping

even worse
my com sometimes cant even ON at all
have to remove the battery
then put back only can on

sometimes can on but monitor no on. no signal detected
have to repeat the same thing
then can on n boot windows

got any solution guys?