Lowyat.NET: Latest topics by jeffbboyz

Water Leaks from Your Beloved Home?

jeffbboyz — Fri, 14 Nov 2014 03:59:23 +0800

Water Leaks from Flat Roof/Toilet Slab/Water Tank Area & ETC ??

Due to the increased price of materials in constructions, quality of houses
that are purchased tend to create problems such as cracks on concrete, water
leakage & failure on eletrical/plumbing etc. Concrete often cracks. It is
inevitably recognized and experienced. Concrete construction requires
construction joints and cold joints. All of these unwanted openings in
concrete structures may cause very serious problems of water leakage.

Many homeowners with poured-in-place concrete foundations will find cracks in
their basement,toilets/baths walls & roofing slab on closer inspection .
Cracks are created by drying shrinkage, thermal movement, and other causes.
If minor, they will cause no immediate problems. But over time, minor cracks
often grow larger and cause major headaches, including reduced structural
integrity or water leakage.

By sealing smaller cracks itself, the homeowner can save hundreds and even
thousands of ringgits. Even if a crack is not leaking now, eventually water
might find a way through it. We supply polyurethane foams injection for all
types of foundation crack repairs. Crack injection has been performed for many
years. In many cases, crack injection will fix the problem.

Cracks on toilets/bath walls & roofing slab will cause major headaches to
solve. For example, for toilets/baths, tiles/mosaic need to be hacked &
cleaned, before applying new layer of flexible acrylic polymer cementitious
waterproofing coating. Then, ponding test need to be carry on to check on
leakage & tiles laying follows. These procedures will take precious hours or
time, and costing thousands of ringgits.

So, how can we help you solve your problems with a minimal cost which save
more than half of the costs using normal repairs, and only takes a day time ?
Polyurethane (PU) foams injection system is your solution!!

How does PU foams injection system works ??

Firstly, we drills holes into one side of the cracks and on an angle so when
the hole crosses through the cracks it does so in the centre of the wall. In
order to inject the into the crack, it is necessary to install injection
ports, also called mechanical packers. The depth of the drill hole
intersecting the crack should be somewhere close to the center of structure,
if possible.

Once packers are tighten, polyurethane foams will be mixed in a high pressure
polyurethane foams injection pump, then polyurethane foams will be injected
through the packers into the walls. Polyurethane foams will infill the cracks
and pushes any existing waters in the cracks out. Once polyurethane foams
infill the cracks, you can see it overflow out from the cracks. Polyurethane
foams will dry in seconds. Leave it for an hour, before further inspection and
leakage check will be done.

Advantages :
- Negative side application possible
- Deep penetration into very small cracks
- Foam increases in volume to fill cavities and voids
- Adjustable gel times
- Excellent bond to wet surfaces
- Underwater injection approved
- Good adhesive strength, tolerant of movement Inert after curing, constant
volume, no shrinkage
- Does not create new cracks
- Non-toxic.

So, what else are you waiting for ???

Call us @ 019-3248488 for FREE consultation on your problems !!

ONLY AVAILABLE FOR JOHOR BAHRU AREA. KLANG VALLEY IS SUBJECT TO AVAILABILITY

[attachmentid=4215903]
[attachmentid=4215902]
[attachmentid=4215901]
[attachmentid=4215900]
[attachmentid=4215899]

Solution To Your Water Leaking Home

Thu, 01 Jan 1970 07:30:00 +0800

Solution To Your Water Leaking Home

jeffbboyz — Mon, 21 Apr 2014 03:41:23 +0800

Concrete roofing leaking ? Bathroom upstairs leaking down through the ceiling of ground floor ? Concrete wall cracks ? Finding ways to solve your problems ??

LOOK NO MORE !! HERE WE ARE TO ASSIST YOU !!!

Due to the increased price of materials in constructions, quality of houses that are purchased tend to create problems such as cracks on concrete, water leakage & failure on eletrical/plumbing etc. Concrete often cracks. It is inevitably recognized and experienced. Concrete construction requires construction joints and cold joints. All of these unwanted openings in concrete structures may cause very serious problems of water leakage.

Many homeowners with poured-in-place concrete foundations will find cracks in their basement,toilets/baths walls & roofing slab on closer inspection . Cracks are created by drying shrinkage, thermal movement, and other causes.
If minor, they will cause no immediate problems. But over time, minor cracks often grow larger and cause major headaches, including reduced structural integrity or water leakage.

By sealing smaller cracks itself, the homeowner can save hundreds and even thousands of ringgits. Even if a crack is not leaking now, eventually water might find a way through it. We supply polyurethane foams injection for all types of foundation crack repairs. Crack injection has been performed for many years. In many cases, crack injection will fix the problem.

Cracks on toilets/bath walls & roofing slab will cause major headaches to solve. For example, for toilets/baths, tiles/mosaic need to be hacked & cleaned, before applying new layer of flexible acrylic polymer cementitious waterproofing coating. Then, ponding test need to be carry on to check on leakage & tiles laying follows. These procedures will take precious hours or time, and costing thousands of ringgits.

So, how can we help you solve your problems with a minimal cost which save more than half of the costs using normal repairs, and only takes a day time ? Polyurethane (PU) foams injection system is your solution!!

How does PU foams injection system works ??

Firstly, we drills holes into one side of the cracks and on an angle so when the hole crosses through the cracks it does so in the centre of the wall. In order to inject the into the crack, it is necessary to install injection ports, also called mechanical packers. The depth of the drill hole intersecting the crack should be somewhere close to the center of structure, if possible.

Once packers are tighten, polyurethane foams will be mixed in a high pressure polyurethane foams injection pump, then polyurethane foams will be injected through the packers into the walls. Polyurethane foams will infill the cracks and pushes any existing waters in the cracks out. Once polyurethane foams infill the cracks, you can see it overflow out from the cracks. Polyurethane foams will dry in seconds. Leave it for an hour, before further inspection and leakage check will be done.

Advantages :
- Negative side application possible
- Deep penetration into very small cracks
- Foam increases in volume to fill cavities and voids
- Adjustable gel times
- Excellent bond to wet surfaces
- Underwater injection approved
- Good adhesive strength, tolerant of movement Inert after curing, constant volume, no shrinkage
- Does not create new cracks
- Non-toxic.

So, what else are you waiting for ???

Call us @ 019-3248488 for FREE consultation on your problems !!
VALID ONLY FOR JOHOR AREA (OTHER STATES FEEL FREE TO CALL FOR FREE CONSULTATION)

Acer ASPIRE 4920G laptop motherboard cost how much

jeffbboyz — Tue, 18 Aug 2009 21:10:57 +0800

I having an Acer ASPIRE 4920G laptop...recently kena strike by lighting...expected to be motherboard burned already....if not mistaken Acer High Point service centre quoted me before last time...price was around RM600...anyone can suggest where to get it cheaper...or is it RM600 a reasonable price...thank you....

Help & Advice from Forumers

jeffbboyz — Sat, 19 Jul 2008 12:17:59 +0800

dear forumers,

I have a case here....i joined lowyat forum since 2006 but i hardly post anything....normally i will only surf around to see for new stuff.....recently i do my first ever purchase on forum via post....and here is my story...

I found someone who are selling headphones....and his price is cheaper compare to the others....so i decide to PM him for purchase the item.....i read his thread and there is a few customer who posted their comments and even photos of them receiving the item safely.....

That seller is malaysian but currently in UK...so he ask me to bank in the RM180 into his maybank account and item will arrived between 5-7 working days...i banked in the money on 11/7/2008....which is saturday...so he said he will send out the item on monday...when i PM him on monday he said item havent arrived from his supplier yet....on weds still havent send out the item....then he said item maybe lost in transaction when the supplier post the item to him.....then later on thursday 17/7/2008 he said supplier send another unit and the item has arrived.....and he said its IMITATION ones.....

So, he said his sorry and will refund the money to me....but i was wonder how he gonna transfer the money back to me when he is in UK....as maybank2u.com need TAC number to approve any transaction.....and today is already 19/7/2008....last week when he started to deal with me...he is online and PM me every single day....but for the past 2 days...he already stopped log in into the forum and very quiet since....and my bank account is still missing RM180.....

I will give the seller some time to settle n refund me my money before i will take further actions.....but before that i would like to listen to forumers comments or advice before i post up his nick...his name...his UK phone number and his bank account number......i have evidence of maybank receipt and his PM.....so i hope forumers will help me in this matter...thank you very much...