Lowyat.NET: Latest topics by ML88

engine cannot start :(

ML88 — Wed, 17 Aug 2011 03:53:58 +0800

hello all the pros out there

my car was proton wira SE 1.5(A) ( 3 gear )

here is my problem, when i twist my key, i heard i small beep sound, but my engine cannot start.
all the lights , signal, aircond running well , dash board lights all function .. so i assume the battery is still good as no alarm rang.

so is that the starter problem ?

additional Q
how much is a original alternator and a recond one ?

[WT ASK] suggest me a woofer

ML88 — Mon, 22 Nov 2010 18:17:28 +0800

hihi dear all sifu,

i got a Soundstream XTA480.4
i need a woofer which my amp can bring up to max..
my exhaust kinda loud ... see if any woofer are capable to cover

so any pro would recommended me n the cost for the woofer .

thanks alot

here are the my soundstream spec

Number of Channels 4
RMS Power (4 ohms) 60 watts x 4 channels
RMS Power (2 ohms) 120 watts x 4 channels
RMS Power (1 ohm) Not Stable
Bridged RMS Power 480 watts
Total RMS Power Output 480 watts
Peak Power Output 960 watts approx.
Minimum Impedance Unbridged 2 ohms
Minimum Impedance Bridged 4 ohms
THD at Rated RMS Power 0.05%
Speaker Level Inputs No
Preamp Outputs 1 pair
Built-in Crossover N/A
Signal-to-Noise Ratio 96 dB
Bass Boost 0 - 18 dB
Fan Cooled No
Fuse Rating 25A x 2

* RMS Power Output:
o 120 watts x 4 chan.@ 2 ohms
o 60 watts x 4 chan. @ 4 ohms
* Bass EQ Control: Fully adjustable subwoofer equalization circuit providing frequency and boost ("Q") adjustment for optimum subwoofer performance. A frequency tracking subsonic filter protects woofers from potentially harmful low frequency information and maximizes output in a usable range.
* Drive Delay II: Amplifier section powers up 2 to 3 seconds after the poewr supply eliminating turn-on and off pops. The turn off process is reversed: Amplifier section turns off first, followed by the power supply.
* Flexible Input Level Control: Allows 500 mV to 4 V input sensativity.
* Trident 3-way Protection
* IDI (Intelligent Distress Indicator)
* Thermal / Short / Over Load Protection
* Stability:
o 2/4 ohms Stereo Mode
o 4 ohms Mono/Bridged Mode
* P.W.M Mosfet Power Supply
* Power and Protection Indicator
* Selectable X-Over HPF / Full / LPF
* 18db Bass Boost with Switch Sub (50Hz)
* Frequency Response: 10Hz - 30kHz
* Variable High-Pass Crossover (50-500Hz)
* Variable Low-Pass Crossover (30Hz-500Hz)
* Variable Sub Sonic Filter: (60Hz-200Hz)
* Gold Plated Terminal Strips / RCA Jacks
* Heavy Duty Heat Sink
* Adjustable Input Sensativity
* Soft Delay Remote Turn-On
* Low Level Inputs
* Phantom Channel For Powering Center Speaker or Subwoofer
* Dimensions: 24.9"L x 12.4"W x 3"H

2gb vs 4gb

Thu, 01 Jan 1970 07:30:00 +0800

2gb vs 4gb

ML88 — Fri, 20 Feb 2009 02:51:22 +0800

as title..
2gb ram vs 4 gb ram

at wat condition , it perform greater..?
i am runnning vista now..

or not much different.?

2gb for me is very smooth .. but if 4 gb ?
wats the benefits?

media proS2.1m/S330 vs C3

ML88 — Mon, 29 Dec 2008 17:53:44 +0800

which 1 better ???????

do S330 wired controller there ajustable for bass n treble ?? or just sound volume

both price almost the same ... just a little small gap.

use C program to merge 2 file= 1 combined file

ML88 — Thu, 04 Sep 2008 19:09:19 +0800

Question

The male and female employee details of a company is kept in two separate files
(m_staff_list.txt for male employees and f_staff_list.txt for female employees)
with each line representing information about one employee.
The Human Resource Department wants to have only one list showing information about all the male and female employees together.
Therefore the two text files must be combined/merged into a single text file (all_staff.txt) which has the Name filed in alphabetical order.

Write a C program to merge the two files to produce a combined file.
After creating the combined file the program must be capable of listing the details of the clerk, engineer, or manager (depending on the user selection) with the Name field in alphabetical order.
The program should display the following menu to the user for them to select one of the four options listed.

Sample Menu:
-------------------------
MAIN MENU
------------------------
1. TO LIST CLERKS
2. TO LIST ENGINEERS
3. TO LIST MANAGERS
4. TO EXIT
---------------------------
Please enter your option <1/2/3/4>:

Sample data for m_staff_list.txt file (sorted on Name field):

Name ID No. Sex Designation
Abraham 1001 m Manger
Clinton 1003 m Clerk
Ibrahim 1005 m Engineer

Sample data for f_staff_list.txt file (sorted on Name field):

Name ID No. Sex Designation
Jasmine 1002 f Manger
Kim 1004 f Clerk
Noor 1006 f Engineer

Program starts

1. check if have m_staff_list.txt
2. read from file and put in an array row by row.
3. check if have f_staff_list.txt
4. read from file and put in an array row by row.
5. array .sort()
6. write into all_staff.txt
:A
7. write Main Menu
8. Display list from array according menu number chosen (printf())
9. back to :A
10. exit.

any PRO help me with this , ... with C language , hopefully any 1 start a little bit or try for me ..
.. sad ... >.<

[WTB] Chassis side panel

ML88 — Mon, 28 Jul 2008 00:40:24 +0800

hi

i want to buy a side panel ,with transparent at the middle ?
anyway to get it ? where ? how much ?

thanks alot!!~