Lowyat.NET: Latest topics by SKYTECH

Dilemma in choosing proposal ring

SKYTECH — Wed, 08 Feb 2017 07:44:05 +0800

Some is 57 traditional cutting facet, some is their own registered cutting facet with 81 & 101 face.

My concern is, is it the more cutting facet more value in future for trade it/sell or stick to the traditional 57 facet ?

Jb Danga Bay close down ?

SKYTECH — Mon, 07 Feb 2011 17:08:29 +0800

Hi , Any1 know y all the shop in danga bay close up ?

Izit they want to do renovate , big project or others reason which cause all the shop close ??

Now Danga bay like a dead town. No ppl at all already.

Mod, if the topic not in right place please move it .TQ.

O2 flame

SKYTECH — Mon, 18 Jan 2010 10:17:25 +0800

Hi all , i have face some problem with my pda . Any sifu can help ?

1) My main camera had a problem , i think a few people have face it , izzit this problem always happen to o2 ? or for my model ? ( 1st it had green effect at d screen,after a few MONTH i no open, when i press camera , the software bounce out itself to the main page , like wat the video show)

This is hardware problem or sofware problem ? Where to repay at jb area ? how much cost ?

This is the same problem happen to this 2 member .
http://forum.lowyat.net/index.php?showtopi...801&hl=o2+flame
- Main camera has problem, Im not sure when this is happen it has green distortion effect. Front camera is fault the 3g video camera still working.
http://forum.lowyat.net/index.php?showtopi...941&hl=o2+flame
- Items is still in good cond exept d main camera slightly got a problem.Still can shoot pic but when use it indoor,theres a green effect at d screen

My current big problem.

(Any1 can help me upload video from flickr website pls pm me), i tried but cant . How ya ?

2) I want to upgrade to Window 6 , izit possible ? Will it have any problem to match my model sofware and hardware ? Better using window 5 or 6 ? Noob here .

3) The spec write 2gb + 64mb flash rom and 128mb ram , but 1 using oni 1gb memory card with empty storage , But still like very slow, izit all the pda like this ?

4) Current battery if normal use , i think most longest can tahan just 1 n halfday / 2 days . Inside normal . Can i upgrade to current battery ? Current oni 1620 mAH, this lelong website is 2600 mAH (1 year warranty) , will it spoiled my pda ? Or i just buy the normal 1620mAH replacement model (lifetime warranty) ? will the price too expensive for those both ? If any1 got lobang which is more cheaper , can pm me .

http://www.lelong.com.my/Auc/List/2007-01D...ee-Shipping.htm

http://www.lelong.com.my/Auc/List/2007-01D...TY-1620-MAH.htm

5) Any1 know what good things can be done by this o2 flame model ? Wish to full occupied it since already use it . Current i just install Garmin map connect with the Holux gps device since it had no built in gps .

Mod please close this topic

SKYTECH — Mon, 24 Aug 2009 09:49:43 +0800

HI all sifu again .

My car battery had kong . currently using ns60 .
i want to ask , is ns70 suit for iswara aeroback with 4g91 ? i got 4 speaker front and rear and 2 woofer at back support with 2 amp.
Ns70 ok or not ? will my car fuis can support ? will blow of any fuis ?

Urgent needed for the information , had to go buy 1 because no car go to work .
Haiy , dompet kena bocor lagi !!

Fiber glass .

SKYTECH — Sat, 18 Jul 2009 18:32:54 +0800

Hi all sifu again .

I wish to know what kind of liquid chamical those bodykit shop using to soft down the fiberglass and make them stick on bodykit and then dry .

Izit the same material for melt fiber down and stick and then dry ? I usually saw them pour some into it , then they mix up the fiber glass , after that they paste on the bodykit ( for repair those crack and pecah pecah ) , and very fast (inside 1 hour) they will dry .

I am mention about the liquid chamical for fiberglass ya , dun miss understood is the putty . (Mayb is same chamical they let the putty dry , i duno)

I saw their is inside those botol like the thinner water , so where can it buy ? hardware shop ? what the liquid called ? how much ?
( I noe got other type like colgate 1, but i dunwan , i want find the liquid as thin as water 1, not the colgate type )

Transplate Engine

SKYTECH — Mon, 04 May 2009 14:26:30 +0800

hi all , Just helping my friend , he currently got a Nissan sentra B14 . Then he wanna transplate his engine .

Got a few choices , But any1 here can give me more info about it .

SR16 NEO VVL
SR20 NEO VVL
SR20 DE

Heard before that the Neo version gearbox got problem . But heard tat sr16 neo is more powerful compare to Sr20 De ,izit real ?
How much the horse power between these engine ?

and 1 more things , tat is for myself because i duno much about nissan engine , neo vvl and ve izit the same things ?

Please all sifu give some opinion . Paste some info website address also can .

Gearbox

SKYTECH — Mon, 13 Apr 2009 15:50:30 +0800

Hi all , I recently had buy a mirage turbo gearbox (Will update the code later) , this gearbox is using clutch pump . Currently my iswara original gearbox is using cable , I lazy to go find the clutch set and mod . So any1 know do the mirage gear can fit into iswara 1.3 original gearbox casing ? Any problem ? How to see does those gear fit the casing ?

And my friend is driving satria 1.3 year 1997 . Does the gearbox same with my iswara 1.3 gearbox ? Because his gearbox wanna kong od , if the gearbox are not same , can my iswara gear fit into his gearbox casing ? Just like the first question i ask at above .

Super Charger

SKYTECH — Thu, 20 Nov 2008 15:12:07 +0800

Hi all , I wish to find out , can we fit a super chager unit on a Mitsubishi engine like 4g9x series . Anyone try it before pls share at here . Saw some toyota engine already fit with super charge , so can we use that to mod on mitsubishi engine ? Will it be difficult ?

Which one is more powerful compare to turbo .

I have zero knowledge about super chager . So hope all member can post supercharger info at here since i no saw a topic start with super charger .

Let share !

About Mirage turbo gearbox into Iswara

SKYTECH — Thu, 23 Oct 2008 20:49:10 +0800

Who knoe about gearbox code , and also the ratio ??
i got a 4g61t mirage gearbox , rm1.1k , ok ma ?? cheap or expensive ? Just the gearbox it own .
Code is B00B0L JC7889
Any 1 know about the ratio and details ??

I want to fit into my iswara aerobck 4g91 . WIll it ok for function ???
The gearbox is 4wd , lock to 2wd already .

Pls advice ! tq .

UPDATE , The gearbox original is 2wd ,and not 4wd lock to 2wd . sori for wrong info .

Iswara 4g91 Upgrade

SKYTECH — Sat, 05 Jul 2008 21:37:28 +0800

Hi , I had some noob question to ask , I had a injection 4g91 in my iswara , I wish to know what upgrade can be done to let it to be more powerful and fast .

I want the best upgrade to be done which does not always cause problem had to repair .

Can all sifu sifu teach how to mod ? mod by step by step like change which part then next stage change which part again ? And if change which part had to change together only will do .

Please list down the modification with the COST also .. tq very much .Cost is not a problem , just wish to know .

Small cost of modification and cause more power will be nice .

My target is just want upgrade the power until like 1.6 or 1.8 , is enough . 2.0 upgrade stuff not recommend . And I want to know what is a oil catch tank , what the function for ?

Can what I list down can be fit in a 4g 91 . Will it suit ? Any side effect , does it run smooth and in good condition .will in be too much for a 4g91 ?

4g92 1.8 / 1.6 cam ?
Wat different between a high cam , and plus together with the adjustable cam pulley .

240cc injectors

4g93/92 exhaust manifold & wesgate

4g93/92 intake manifold

4g93/92 engine head

4g93/92 piston ( had to bored the block to be bigger ???? ) Any side effect ?

4G93/92 Throttle body

# Any other pls teach , I just know abit only . sorry for so much question .

# Dear Modarator pls allow me open this , because 4g dicussion is too many discussion , my topic will quickly be cover over , tq tq .

Finding hard to choose seat for iswara aeroback

SKYTECH — Mon, 30 Jun 2008 17:04:56 +0800

Hi , everyone , I want to ask 1 things, to all sifu sifu , I want to change my car whole seat , I want to know izit the evo recaro and gsr recaro rear seat cannot fit iswara aeroback , the mouting at rear is different ? can modified ? if modified will it be cun ?

Rm 1200 for evo 1 , RM 1300 for gsr , both front and back .

Or I just take the new sscus evo 9 design seat , This is more style and is brand new . which decision is more good ?

I got another 1 pair front crx seat for rm 400 . mayb will take this . how ?

2008 Proton Saga BLM = 'Boleh Letak Mivec'

SKYTECH — Thu, 26 Jun 2008 22:20:25 +0800

This Proton Saga BLM "Boleh Letak Mivec" started its life with the CAMPRO 1.3 engine which was suddenly ended two weeks into its life due to its owner suicidal attempt merentasi air banjir.

The owner a "Cikgu", initially wanted to replace its broken Campro 1.3 engine with another Campro unit. However when he was quoted close to RM 15,000 for that not even 100hp powertrain he decided to get 175ps @ 7500 rpm in the form of 4G92 MIVEC derived from the Lancer CK4A.

The 4G92 MIVEC is also widely known as MIVEC " terbalik " which we have seen installed in various WAJAVECs , Gen-2s. and finally make its way into the New Proton SAGA BLM.

This is all the info we have right now.Last but not least the installation was done by Nick Motorsport of Bangi. Watch this space for an exclusive video and test drive report soon.

"Anything is possible in Bolehland".

#### COPY RIGHT FROM TERATO.COM

LINK AS BELOW .

http://www.terato.com/cars/content/view/1104/47/

Engine installation completed for the Proton Saga BLM = "Boleh Letak Mivec" and is now running.Here are some updated photos taken yesterday ( 3rd July 2008 ).According to Nick Motorsports the engine conversion can be completed on the new Saga in one week time.Looking at the photos you will see that this Saga is still retaining the stock dashboard and everything from the factory except for the gear lever that originally came with the 4G92 Mivec engine.Also noted is the HKS air filter.The rest is still original and we cant wait to post the review of the Proton Saga 'Boleh Letak Mivec'.

http://www.terato.com/cars/content/view/1118/47/

----------------------------------------------------------------------------------------------------------------------------------------------------------------------

Proton Saga BLM "Boleh Letak MIVEC" Video

Proton Saga Boleh Letak MIVEC running video. This Saga still retained the stock dashboard and everything from the factory except for the gear lever which originally came with the 4G92 Mivec engine and the HKS super airflow air filter.The rest is still as it came from the Proton Production line. Hear the MIVEC roars as we put the pedal to the metal.

http://www.youtube.com/watch?v=v3PuJyjGHkY
http://www.terato.com/cars/content/view/1124/40/

[youtube]v3PuJyjGHkY[/youtube]

Iswara 4g91 jacking problem

SKYTECH — Thu, 12 Jun 2008 09:40:13 +0800

HI all sifu sifu ,I just convert 4g13 to 4g91 , just collect yesterday , and 2day I found the car is jacking , not yet send back to the workshop , before sending back I wish to know what the real problem was . When the car started to change to 1st gear and every other gear , the car will jacking a bit , feeling somethings like the fuel supply not enough , after that when the car had stable to 1 speed , will jacking again then continue ok again . exhaust also got sound ‘pi pi pop pop’

So was it the plug problem ? coil problem ? plug cable ? fuel filter ? injector ? or the fuel pump problem or the exhaust problem ?? My budget already finish , wish it just some small matter. Pls help me !

New WAJA EVO X ?

SKYTECH — Sun, 01 Jun 2008 13:17:31 +0800

WAJA EVO X ???

Anyone still remember the waja convert to evo x ? I just saw it in Johor , taman universiti when I was eating , the masterpiece look very nice . Dunno the engine got change to evo ma . Sorry for the blur picture as my handphone not so good, can only take picture from far , coz look is a ah beng hardcore style driver . But the car look really nice , cant recognize at all is a waja until u watch the backside . 1st i wondering , which rich man go to spray white colour on the new evo , but when i turn and saw is waja , then i remeber the tread before. HAHA, so anyone wanna convert their waja too . Enjoy it .

Finding a PDA phone

SKYTECH — Mon, 26 May 2008 22:08:40 +0800

HI,I wish to buy a pda phone , but still newbie about the pda, so I wish you all can give abit suggestion to me on O2 , HTC , IPHONE and bla bla bla . I WANT the pda got build in GPS system , Bluetooth , 3G ,Infrared and using window system running , and hope the ROM and RAM is bigger enuf, dun perform too slow .

Any1 selling can inform me , I also wish to find a shop in JB that expert in pda and got selling those 2nd hand pda, bcoz is 1ST time using, I dun tink too buy a new 1 as is abit waste . Any1 know the shop pls leave the address to me . Thanks a lot to you all kindly helping 1ST .

Modified Iswara year 95 head lamp

SKYTECH — Tue, 22 Apr 2008 20:29:22 +0800

I had buy a head lamp as show in Picture LAMP A , Is From nissan silvia planing to modified to my iswara aeroback year 95 , BUT i found is too long compare with the old one , and the seller say can be modified to fix it , like show in Picture LAMP B .Lamp B is from nissan cefiro. Does it mean had to cut the front grill and bonnet part to fix it ? like in PICTURE 1 ???

Or just take it to the shop for solution number 2 ? Above call as Solution 1 la ya .
AS show in the PICUTE 2 take out the projector, using lmst lamp to fix the projector using the nissan silvia or cefiro inside then fix it back .
But this way will cost alot something plus the LMSt lamp will about RM500, because i now using stock lamp , not lmst type .
Consider back had to cut the bonet and how to cut short the front grill also a problem , my car just spray 3 month ago .
If i cut , next time wanna change head lamp had to buy new grill and bonet , also waste .
If I using solution 2 , i duno the silvia Projector and the base really can modified like cefiro in PICTURE 2 .
SO sifu sifu which had done this before please kindly give me advise using which solution .Thanks .
If any sifu know wher can modified in jb and melaka area please kindly tell me .

Classic car

SKYTECH — Thu, 06 Mar 2008 23:26:55 +0800

Hi everyone, I m here to helping a friend of mine finding a classic car ,he want a car that look like American style muscle car . So if any1 had it and wish to sell at cheap price please inform me , or if anyone saw it at car selling shop , or chop shop still in 1 good piece condition please tell me too .If got picture 2gther will be nicer .( Half cut dun wan la , already cut half ,who want it )

The car such as bellow also be consider .

Ford Escort
Mazda 808
Nissan Skyline 1972
Nissan Hino
Daihatsu Conparno
Daihatsu Consolute
Subaru FF-1
Daihatsu Max
Honda 1300
Honda 145
Isuzu Gemini
Isuzu Bellett
Isuzu 117
Honda S500
Mazda Roadpacer
Mazda Grandfamilia
Subaru 1000
Toyota Publica
Toyota Century
Nissan Cherry

Perdana Replacement ?

SKYTECH — Tue, 04 Mar 2008 22:40:21 +0800

Perdana replacement ? izit real , when will be out ?

4g15 Carb

SKYTECH — Mon, 25 Feb 2008 20:14:18 +0800

Hi, I want to know what can 4g15 CARB add on or modified to be more powerful.
I had a Iswara aeroback 4g13 year 95 , want to change to 4g61 or 4g91, but my mechanic say confirm will not pass, even pass also had to give kopi ,that I dun mind , just I dun want 1 day kena road block , whole car say bye bye to me ,and he add on say is not worth to change to 4g15 EFI , coz add more Rm 1000 – 2000 to buy halfcut .Now he wanna change 4g15 carb with jpj approve fee and engine plus workmanship Rm2000 . Does it worth ? I wanna know wat 4g15 can turn into 1st before I make up my mind to change which engine .SIFU SIFU pls help .

B13 Side Mirror With 5 Wire + Switch

SKYTECH — Sat, 19 Jan 2008 08:58:22 +0800

I am finding did any1 want to let go their b13 side mirror with 5 wire that kind ? and with the switch togther ??? Pls let me know or contact me at 017-7500133 .