Use TIME Fiber VoIP on other devices

PRSXFENG — Sat, 06 Jul 2024 13:42:34 +0800

2025 Update:
It seems that TIME is killing off the TIME Voice App
This might stop working soon? We'll have to see if that IP goes down

https://forum.lowyat.net/index.php?showtopi...ost&p=111334608

Guide on setting up TIME Fiber VoIP on other devices
Inspired by [@Anime4000]'s guides

With this, you can use any of your other devices to make and receive calls as if you were using the Time Voice app
May be useful for those using their own replacement ONU

Note, Guide written with Huawei HG8145X6 as your original modem/router and using MicroSIP in mind:
Note, this assumes you have telecomadmin access to said Huawei modem/router
Note, you may need to enable TIME Voice App(?)
Note, only for educational purposes, I take no responsibility for any issues that may arise from following this

Phone Number:
Your Phone Number, use as Username in MicroSIP
This can be obtained by going to Advanced -> Voice -> VoIP Basic -> Registration User Name

CODE

eg: 0311223344

Username:
Username, use as Login in MicroSIP
This can be obtained by going to Advanced -> Voice -> VoIP Basic -> Authentication User Name

CODE

8 character username, with lower and uppercase letters, and also numbers

Password:
This one is a bit of a pain to obtain, see info further in thread

CODE

16 character password, with lower and uppercase letters, and also numbers

SIP Server:
Note: This IP was obtained from TIME Voice Mobile app, as the server proxy used by the modem is in an internal 10.X.X.X IP range and doesn't work outside of it

CODE

223.28.6.132:9060

Codec:

CODE

1. G.711 A-Law
2. G.711 u-Law
3. G.729

Your MicroSIP config should look like this
[attachmentid=11498617]

some other optional configurations that could be set but I didn't and didn't face issues
DTMF Method: RFC2833
Register Refresh: 3600
Digitmap: [xABCD].S|[xABCD].#
User Agent (of TIME Voice App): Time Voice/5.5 (build 1820065; Android 13; arm64-v8a)

Password Guide:
Firstly, export config file from Advanced -> Maintenance Diagnosis -> Configuration File Management -> Download Configuration File
open the file and search for AuthPassword
find one with your phone number / username near it
the encrypted password should begin and end with $
then, visit https://andreluis034.github.io/huawei-utility-page/#cipher
Paste it in, and it will output your VOIP password

Any good usb drives these days?

PRSXFENG — Wed, 30 Jun 2021 12:04:10 +0800

So, I find myself never having enough USB drives
I got myself an ADATA UV350 which was decent but unfortunately died after just 2 days of use, probably a bad unit

so, I'm on the hunt for a USB drive again
most manufacturers don't give detailed specs about their drives so i want to ask LYN for recomendations

I'm currently looking at the Lexar JumpDrive M37 but I cant find much if any info out there

There is this old thread for benchmarks https://forum.lowyat.net/topic/191462 but it has been dead for many years

Just needs to have faster than like 10MB/s writes

my use case is to write a lot in one go (like fill up 40GB), then mostly read from it afterwards.

Looking at Sandisk they seem to run very hot, and Kingston is slow.

Also considering Sandisk Ultra Flair and Kioxia U365

Lowyat.NET: Latest topics by PRSXFENG

Use TIME Fiber VoIP on other devices

Any good usb drives these days?