Lowyat.NET: Latest topics by cebi

Reunion dinner place and rate in kl/selangor

cebi — Wed, 31 Oct 2018 22:26:39 +0800

My friend would like to organize some reunion dinner in Kl/selangor. It would be nice to organize in hotel, but since we have only about 30-40 pax, it is possible? The current budget we plan is around rm100-rm150/head.

Is there anyone have experience in handling small group reunion?

Thanks!

[WTS] Spray mount adhesive

cebi — Tue, 07 Nov 2017 16:39:07 +0800

Item(s): Spray mount adhesive (Guerqi Super 99)

Package includes: Guerqi Super 99 adhesive spray (net : 600ml)

Multipurpose spray adhesive that can be used for a variety of projects to bond temporary in any lightweight material.
Great for use in embroidery works, silkscreen works, poster works, or any other craft projects since it allow to re-positioning on the surfaces.
It is transparent spray that dries quickly and create temporary bonding.

Price: Rm 15/unit

Warranty: N/A

Dealing method: Meet up around Ipoh. Postage fee to Peninsular Malaysia for below 3 units is RM10.

Location: Ipoh Perak

Contact method/details: 012-5436764
---

Item(s) conditions: New

Picture:

Reason for sale: I have extra unit available for my silkscreen works.

[WTS] Ninetology U9X1 battery (i9480)

cebi — Mon, 23 Jan 2017 15:48:02 +0800

Item(s): Ninetology U9X1 battery replacement (i9480) (SOLD)

Package includes: Battery itself with screen protector (FOC), add RM10 for rubber casing

Price: RM50 (fixed)

Warranty: None

Dealing method: Meet up around Ipoh or postage can be arrange.

Location: Ipoh Perak

Contact method/details: PM me or can reach me thru whatsapps - 012-543 six seven six four
---

Item(s) conditions: New

Picture:

» Click to show Spoiler - click again to hide... «

Reason for sale: I got extra stock, only 8 pieces left. Since i own this phone too, the battery is fitted nicely and the performance is average The capacity is same just like the original battery too which is 2200 mah.

IOS 7 to IOS 8.2

cebi — Sun, 05 Apr 2015 03:40:21 +0800

Does anyone face the same situation like me? I downloaded ipsw for ios 8.2 since i wanted to upgrade ios. After finish back up in itunes, i restore the ios. And after waiting about couple of minute, error notifaction come out and my ipad stuck at recovery mood. Mine is ipad 2 wifi. Please help

Mod Parallel port to 8 Row of LED

cebi — Thu, 29 Oct 2009 15:45:07 +0800

Hi everyone

I would like to share with all of here with interesting mod that i've done,suitable for bling-bling modders.Im using lpt port (parallel port)for this mod.Since there are no such topic start in here,so here are the procedure to make this project.

WARNING: PC parallel port can be damaged quite easily if you make mistakes in the circuits you connect to it. If the parallel port is integrated to the motherboard (like in many new computers) repairing damaged parallel port may be expensive (in many cases it it is cheaper to replace the whole motherborard than repair that port)

** tested on windows XP & vista & Win 7 and it work like a charm**

PC parallel port is 25 pin D-shaped female connector in the back of the computer. It is normally used for connecting computer to printer, but many other types of hardware for that port is available today.

Items you need : 8x LED (any color)
8X resistor ( i use 1k ohm)
extra wires
Printer cable
Masking tape (heat shrink is more better)

Additional note : You can do more better by using IC board.Mine is for testing only

First of all,here are simple diagram,hope this help

You can make up to 8 LED,picture above is example of wiring diagram only

1)1)Ok,lets begin the first step.Take the printer cable and cut the cable to female side using cutter.Then you should have 1 long cable with male connector in the end.After that,cut out the cable shield at the part you cut the female side.You should see a bunch wires and each got colors.So,to make sure what wires you should use,refer back to the male connector.You should see there are codes for each pin (look closely) at this male connector.

Sample of Printer cable

After cut

2)The pin in male connectors should have a number like this 1-13 and 14-25.So the male connector got 25 pins. The wires you should are number 2-7.So,check the connector back and look the pins 2,3,4,5,6,7 and look what color for each numbers.Usually number 2 pin should red color wire while number 3 pin should orange.For 4-7,just check it out by urself.Be careful while choosing the wires because there are wires with same colors.To differentiate between this to wires,there are some black or white lining.

Inside of male pin

3)Take the connectors and put the LED just like the picture above.The LED should be place in positive first which means the positive side is a left end of connector.

4)Take the first wire (number 2 pin wire,is a red color one),strip it a little.Then take the resistor (any side) and twist the wire to the resistor and solder it.Then place the resistor in connector and tight the screw.

5)Now the positive side is settle already,now the negative side turn.The number 2 row (from left) should be negative side.The -ve side of LED should already insert in connector. Take extra wire and cut it around 1 inch-1.5 inch.Strip it and it should place opposite of -ve LED leg (please refer to the picture).

Extra wire to connect each -ve

6)Alright, +ve and -ve side for first LED is done.Now do it for second LED. Same procedure,just find number 3 pin and check the wire (look out the colors).Take the number 3 wire and strip it to twist with capacitor,then solder.Insert the resistor to the connector and tight the screw.Take the LED and place it just like number 3-4 procedure.

PC turns ON 1 sec then turn OFF 2 sec and ON again

cebi — Fri, 23 Oct 2009 16:45:52 +0800

Help me please,confuse about this problem.
I switch on the power button,then about 1 sec it ON then suddenly OFF again and about 2-3sec it ON like a normal POST. It is because of my BIOS setting or my overclock setting? Or maybe my PSU faulty?

My current spec :
Pentium Dual core e2180
Biostar TP45 Hp (P45 chipset)
Vantec ION2 500W
Corsair XMS DHX 2GB
Galaxy 9600GT
Western Digital 640GB Hdd

Thanks

Problem installing windows Xp (Solve)

cebi — Sat, 11 Oct 2008 12:14:43 +0800

I just buy the new rig 5 days ago. I'll install the windows from booting the cd since it was first installation of os.The problem is when i format using windows xp SP2 cd, then after the agreement ( pressing F8) to agree, then it should go to the creating the new partition,right. then,i create 4 partition (C,D,E,F) and i choose C drive to install.then i choose format using ntfs (quick). After that it will loading2,right. and the problem came here when it copying the system file,sometime it cannot copy the system file and it said your cd could damaged (forgot ) .The files sometime randomly stuck and force me to retry option to copy that file or skip the file to install such as any dll files or other system files. There are 3 option there, skip the files (pressing escape), retry(press enter) or quit (press f3). If i retry,sometime it work, sometime not. If i retry so many time, BSOD will come out . I have try many time to install the windows with other windows xp sp2 (probably copy one) ,but the problem still same.When i take the hdd to another computer, the formating was smooth without any trouble to copy system files.
So why the other computer when i install should be no problem. What is my problem now? i have reseat the ram, graphic card and also sata cables.

here is my spec:

Intel pentium dual core E2180
Biostar TP-45HP
Galaxy 9600 Gt
2 gb ddr2 corsair XMS2
LG dvd rom (ide)
650gb western digital
vantec ion2 500w

the other computer spec that running smoothly when installing the windows:

Amd athlon64 FX2
biostar TA690G
2.5Gb kingston ddr2 ram
on-board graphic
LG dvd rom (ide)
Powerlogic 450W